| Availability: | |
|---|---|
| Quantity: | |
Gold Plated Beryllium Copper (BeCu) Alloy Wire is a specialized copper alloy material designed for precision electronic components and applications requiring a combination of mechanical strength, electrical performance, and surface reliability.
Beryllium copper combines the electrical properties of a copper-based alloy with high mechanical strength. When an appropriate gold plating process is applied, the surface can provide additional benefits for electrical contact applications, particularly where stable contact performance and resistance to surface oxidation are important.
Meitong's published BeCu alloy wire specifications cover diameters from 0.03 mm to 1.2 mm, with a stated tensile strength of ≥1000 MPa and elongation of 1–5%.
The suitability of a particular wire for connectors, precision springs, electronic contacts, or other components depends on its alloy grade, material condition, plating specification, and manufacturing requirements.
The following table summarizes the main parameters published for Meitong's BeCu alloy wire. Final specifications should be confirmed through the approved technical datasheet.
Parameter | Specification |
|---|---|
Product Type | Beryllium Copper Alloy Wire |
Material | BeCu Alloy |
Wire Diameter | 0.03–1.2 mm |
Tensile Strength | ≥1000 MPa |
Elongation | 1–5% |
Surface Treatment | Gold Plating (availability to be confirmed) |
Other Published BeCu Plating Options | Silver, Tin, Nickel |
Alloy Grade | To be confirmed |
Electrical Conductivity | To be confirmed for the selected grade |
Gold Plating Thickness | To be confirmed |
Material Condition | To be confirmed |
Main Applications | Electronic Contacts, Connectors, Precision Springs |
The mechanical properties shown above are based on the existing product page. They should not be interpreted as guaranteed values for every diameter, alloy grade, or material condition without verification.
The BeCu alloy core provides the primary mechanical and electrical characteristics of the wire.
Depending on the alloy grade and processing condition, beryllium copper can offer a useful balance of strength, elasticity, fatigue performance, and electrical conductivity.
These characteristics make BeCu a candidate material for components that require controlled deformation, electrical contact, or repeated mechanical movement.
Gold plating is used in selected electrical contact applications because of its resistance to surface oxidation and its suitability for maintaining conductive contact surfaces.
For gold plated BeCu wire, important coating parameters include:
Gold plating thickness
Plating uniformity
Surface condition
Coating adhesion
Compatibility with subsequent forming or assembly operations
The required coating specification should be determined according to the intended component and operating environment.
Fine BeCu alloy wire is used in applications where wire dimensions and material consistency are important.
Wire diameter, dimensional tolerance, surface finish, and material condition should be specified according to the requirements of the final component.
The published BeCu wire specification indicates tensile strength of ≥1000 MPa.
High tensile strength can be useful in precision components that require resistance to deformation. However, tensile strength alone does not determine spring performance, fatigue life, or the suitability of the wire for a specific design.
As a copper-based alloy, BeCu provides electrical conductivity alongside mechanical strength.
Its actual conductivity depends on alloy composition, heat treatment, and material condition. Electrical performance should be evaluated using grade-specific technical data.
Certain BeCu alloy grades are suitable for elastic components, including contact springs and other formed parts.
The final spring performance depends on the selected alloy grade, manufacturing process, heat treatment, and component geometry.
Where gold plating is specified and verified, it can support surface reliability in electrical contact applications.
Plating thickness, adhesion, and wear requirements should be considered during material selection.
The published diameter range of 0.03–1.2 mm provides a reference for applications involving fine metal wire.
The availability of individual diameters and their corresponding mechanical properties should be confirmed before ordering.
Beryllium copper is used in certain electrical connector components because of its combination of mechanical strength, elasticity, and conductivity.
Gold plated BeCu wire may be considered for connector designs requiring a suitable conductive surface and controlled mechanical performance.
Typical considerations include contact geometry, insertion cycles, contact resistance, and operating conditions.
BeCu alloy materials can be used in electrical contact components where mechanical movement and electrical connection occur together.
For these applications, the alloy grade and surface treatment should be selected according to the contact force, electrical requirements, and expected service conditions.
BeCu wire can be used to manufacture selected precision spring components, provided the alloy grade and processing condition are appropriate.
Important selection factors include tensile strength, elasticity, forming characteristics, and fatigue requirements.
Fine alloy wire may be used in miniature electronic assemblies where component size, material consistency, and mechanical performance are important.
The final material selection should account for dimensional tolerance, processing conditions, electrical properties, and compatibility with the assembly method.
Selecting the correct BeCu alloy wire requires evaluating both the base material and the surface treatment.
Different BeCu grades have different mechanical and electrical properties.
Buyers should identify the required alloy composition and material condition before comparing available wire specifications.
The required wire diameter should be determined according to the component design, manufacturing method, and dimensional tolerance requirements.
Tensile strength and elongation are important, but additional properties may be required for spring or contact applications.
Depending on the component, buyers may also need information about hardness, yield strength, or fatigue performance.
Gold plating requirements should be defined according to the application.
Buyers may need to specify coating thickness, surface quality, adhesion requirements, and any relevant plating standards.
For electrical contacts, the required conductivity and contact performance should be reviewed alongside the mechanical properties.
Before ordering, buyers should confirm the available inspection data, dimensional tolerances, material documentation, and acceptance criteria.
For efficient material evaluation and quotation, buyers are encouraged to provide the following information:
Item | Required Information |
|---|---|
Material | BeCu alloy grade |
Diameter | Nominal wire diameter and tolerance |
Mechanical Properties | Tensile strength, elongation, and other requirements |
Material Condition | Required temper or heat treatment condition |
Plating | Gold plating specification and thickness |
Electrical Requirements | Conductivity or contact performance requirements |
Quantity | Estimated order quantity |
Application | Intended component or manufacturing process |
Documentation | Required test reports or inspection records |
Providing these details helps clarify the technical requirements before quotation and production planning.
Gold plated beryllium copper wire consists of a BeCu alloy base material with a gold plated surface.
The alloy provides mechanical and electrical properties, while the plating is selected according to the required surface characteristics.
Gold and silver coatings have different electrical, surface, wear, and environmental characteristics.
Gold is often selected for contact applications where oxidation resistance is important, while silver offers high electrical conductivity but may be subject to tarnishing under certain conditions.
The appropriate coating depends on the operating environment and component requirements.
Meitong's published BeCu alloy wire range is 0.03–1.2 mm.
The availability of specific diameters, tolerances, and plating combinations should be confirmed before ordering.
Certain BeCu alloy grades are used for precision spring components because of their mechanical strength and elastic properties.
The selected grade, material condition, forming process, and heat treatment must be suitable for the intended spring design.
Buyers should confirm the alloy grade, wire diameter, mechanical properties, gold plating thickness, dimensional tolerance, and required inspection documentation.
Yes. Processing methods that generate airborne dust, fumes, or fine particles may create beryllium exposure hazards.
Manufacturers should follow applicable occupational safety requirements and material safety guidance, particularly for grinding, machining, welding, or other processes that may generate airborne contaminants.
Buyers evaluating BeCu alloy wire may also wish to compare other copper-based or specialty alloy wires according to their required mechanical, electrical, and surface properties.
Related materials include:
Silver Plated BeCu Alloy Wire
Gold Plated NbCu Alloy Wire
MgCu Alloy Wire
Nickel Coated Copper Wire
Material selection should be based on the specific performance requirements of the final component.
Looking for beryllium copper alloy wire for precision electronic components or specialized manufacturing applications?
Meitong provides specialty alloy wire products for industrial and electronic applications.
Please share your required alloy grade, wire diameter, mechanical properties, plating requirements, quantity, and intended application.
Contact Meitong to discuss available specifications, technical documentation, and quotation requirements.
Other Alloy Wire | |||||
Name | size (mm) | Tensile Strength | Elongation (%) | Coated/Plated | |
CuCr-Alloy | 0.03-1.8 | ≥770 | 1-5 | Sliver/Tin/Nickel | |
100% Ag Wire | 0.03-4.0 | ≥130 | 1-5 | Sliver/Tin/Nickel | |
NiCr-Alloy | 0.03-1.0 | ≥800 | 1-5 | Sliver/Tin/Nickel | |
Ni-Cr-Ti Alloy | Cr20Ni80 | Cr30Ni70 | Cr30Ni70 | Cr20Ni35 | |
NbCu Alloy | 0.03-1.0 | ≥770 | 1-5 | Glod/Sliver/Tin/ | |
BeCu Alloy | 0.03-1.2 | ≥1000 | 1-5 | Sliver/Tin/Nickel | |